- Day 1: KIVI Energy Symposium
- Day 2: Saving Energy; Changing Habits
- Day 3: Material Challenge
- Day 4: Energy NOW congress – Energy Storage & Smart Grids
- Day 5: Metal Fuels
- Day 6: Cancelled
- Day 7: Geothermal Energy
- Day 8: High Power Electronics & Systems
DAY 1: KIVI ENERGY SYMPOSIUM – 24 September 2015
The 2015 KIVI Energy Symposium will be on the topic of compact conversion and storage of energy: Blue Energy. The purpose of this symposium is to provide a broad perspective on the potential of energy storage and to build a bridge between enterprises and universities.
This is a combined symposium of the KIVI departments Applied Physics and Mechanics and the Strategic Area Energy of TU/e.
Also a guided tour at the Darcy lab is available for only a limited amount of people.This lab is the new magnet laboratory of the TU/e. Signing up for the guided tour is only possible by mailing to Dieudonnee Cobben.
- Welcome by David Smeulders, chair of the day – TU/e
- The challenge to develop technology that is able to harvest Blue Energy in a clean, efficient and cost-effective way by Bert Hamelers – WETSUS
- The scientific developments and design strategies for Blue Energy in relation to the practical application by Kitty Nijmeijer – University Twente
- The Microbial Fuel Cell, a clean, CO2 neutral, and efficient technology to recover electricity from wastewater by Annemiek ter Heijne – Wageningen UR
DAY 2: SAVING ENERGY; CHANGING HABITS – 3 December 2015
Our Western lifestyle requires a lot of energy. Next to make our energy supply system more sustainable by using energy from the sun, wind and water, we also should look critically at our consumption patterns. However, in the last few decades efforts to change our behavior have not been very successful yet. Why this is so difficult, what we have learned and what we can do about it, is the theme of this EnergyDays. The invited speakers addressed this from different perspectives.
- Welcome by Geert Verbong, TU/e
- The psychology of saving energy by Ellen van der Werff – University of Groningen
- Engaging with transitions in organized behaviours: the example of smart grids by Gert Spaargaren – Wageningen UR
- Behavioural change from theory to practice by Ruth Mourik – Duneworks
DAY 3: MATERIAL CHALLENGE – 17 March 2016
The availability and efficient (re)use of material resources is key to make the transition to a sustainable society. We will have to move from linear use of materials to a circular economy. In this EnergyDays, the material challenge will be approached from different directions. We will address the impact of scarcity in material resources and the need to innovate our technologies. We will focus on the demanding material requirements for future fusion reactors and the need for basic research on novel materials and concepts. Also we will take a look to research on clever product design to improve primary material use, resource efficiency and recycling possibilities.
- Welcome by Erik Langereis, DIFFER
- Supply of raw materials and future energy security by Ton Bastein – TNO
- Touching the sun: finding materials for fusion reactors by Thomas Morgan – FOM Institute DIFFER
- Circular Product Design: closing the loop and maintaining value by Ruud Balkenende – TU Delft
DAY 4: ENERGY NOW – 9 June 2016
Energy Storage & Smart Grids – This congress was mainly organized by Team Energy!
Energy Now is a congress directly related to the current energy transition. Our goal is to inspire, interest, and trigger students to take elegant action in the transition towards sustainable energy.
DAY 5: METAL FUELS – 27 October 2016
The EnergyDays on Metal Fuels were a great success. Barely enough seats to host the many people that were attracted by the topic. We have learned that metals are a very promising clean energy carrier that may replace a large part of the fossil fuels we are using today. The high energy density of metal fuels was demonstrated by Yuriy Shoshyn who combusted some metal powder during the event leading to a very big flash.
Imagine you live in 2030 and you want to travel a few hundred kilometers with your new iron-fueled car that does not emit any CO2. You insert a new cartridge with a few liters of porous micron-sized iron powder. You drive the car and when driving, the iron powder is dispersed in air and the powder is burned in a hot turbulent flame transferring the iron powder into micron-sized rust-powder. Inside the iron-car the hot burnt gases are used fire a Stirling engine to drive the car. The burnt rust particles are stored in a separate compartment of the original cartridge and when returning home you bring the (heavier) cartridge back to the store, from where it is shipped to a central place where the rust is transferred back to micro-sized iron particles again using solar energy.
Whether this vision of the future is real, will become clear in the upcoming EnergyDays event where we will explore the possibilities of Metal Fuels as a novel type of energy carrier.
- Welcome by Niels Deen – TU/e
- Metal fuels for zero-carbon heat and power by Jeff Bergthorson – McGill University, Montreal
- Sponge iron powder as a possible fuel of the future by Yuriy Shoshin – TU/e in the future: Opportunities for spinning disc technology by John van der Schaaf – TU/e
DAY 6: CANCELLED
DAY 7: GEOTHERMAL ENERGY – 23 March 2017
Geothermal energy is available 24/7 and can thus potentially complement the intermittent renewables solar and wind energy that come with strong diurnal and seasonal variations. This EnergyDay will focus on the future potential contribution and role of geothermal energy in the Netherlands and abroad, and discuss the technical challenges that we need to address to tap into this underground heat source.
- Welcome by David Smeulders – TUe
- Geothermal for Electricity Production: dreams & realities by Brice Lecampion – EPFL, Geo-Energy Lab – Gaznat Chair on Geo-Energy
- Heat transition within the Netherlands by Lydia Dijkshoorn – RVO.nl
- Heat from under our feet – Geothermal energy in the Netherlands by Martijn van Aarssen – IF Technology
DAY 8: HIGH POWER ELECTRONICS & SYSTEMS – 22 June 2017
Modern power electronic converters allow to provide electrical energy processing in a very efficient way in many applications including solar and wind energy conversion, hybrid and electric cars, high-performance computer power supplies, switching audio amplifiers, solid-state lighting, utility control and smart grids, portable power, and many others. The goal of the energy days is to present and discuss the state-of-the-art concepts for switching power conversion (developed at the Technical University of Eindhoven), including various topologies for many applications, their operation and control choices, harmonics and filtering, circuit models of real sources and devices, magnetics design, and passive and active component behavior.
- Welcome by Geert Verbong – TU/e
- Introduction to ‘High power electronics & systems’ by Elena Lomonova – TU/e
- Trends in power electronics by Elena Lomonova -TU/e
- Grid-connected converters with voltage support using only local measurements by Ya Zhang – TU/e
- 3-5 Level bidirectional dual active bridge dc-dc converter by Georgios Sfakianakis – TU/e
- Switched-capacitor converter with continuous conversion ratio by Mert Turhan – TU/e
- Wide voltage-range isolated dc-dc conversion for high-power applications by Nico Baars – TU/e